Welcat GTX-100, Руководство пользователя

Страница: 72 / 171

3-8 System Setup Menu
3-17
1. Receiving the time data from the DHCP of "WebGlider-X" Network Manager.
5GTXGTUGVVKPI
&*%25GTXGT
%QPPGEVVQ
%QORNGVGF
1-
Press key or key to return to check the current time.
%QPPGEVVQ
6KOGCESWKUKVKQP
HCKNGF
4GVT[!
5GTXGTUGVVKPI
4'64; %#0%'.
When receiving is failed, the screen on the left is displayed.
[Select RETRY], to receive the Time data from the server again.
Select [CANCEL], or Press the key to cancel setup and return
to Current time.
3-8-3 Resume (resume function)
The GTX-100 supports a resume function. The resume function can be enabled through the System menu and if
selected, the next time the key is pressed on the GTX-100, the resume function will be used. Resume mode ON
after the GTX-100 is powered OFF, the next time the key is pressed, it will resume operation where it was just
before the power was turned OFF. For details of the resume function, please refer to the "1-10 Resume func-
tion"(P.1-26).
●Resume mode ON
After the GTX-100 is powered OFF, the next time the key is pressed, it will resume operation
where it was just before the power was turned OFF. (Power ON, pressing the key while pressing
the scan key to cancel resume mode)
●Resume Fail
4GUWOGHCKN
JKVCP[MG[
5VCTVWUWCN
Resume setup will fail when the power OFF by removing the bat-
tery and without pressing the key.