Welcat GTX-100, Руководство пользователя

Страница: 152 / 171

4-1 FAQ
4-3
Q: The System Menu does not start.
■ Is the "application" set to "Auto execute"?----(P.3-15)
From the System menu, select "1
：
System setup", and then select "1:Auto execute" to set the
System menu for automatic launch.
■ To force the launch of the System Menu, hold the scan key then press the
key.----(P.3-9)
Q: How do I change the application, which starts when the
power is turned ON?
From the System Menu, select "1:System", then "1:Auto execute " to set the desired application for
automatic launch. ----(P.3-15)
Q: How do I start another application?
From the System Menu"5
：
File", select "2
：
Application " then select "Execute" from "Sub
Menu" to run.----(P.3-51)
Q: The Barcode is not scanned successfully.
■ Does the scanned Barcode meet the Barcode settings set in the application?
Some application settings prohibit a specific kind of Barcode from being scanned.
■ Isn't a specular reflection occurring?----(P.1-15)
■ Is scanning distance correct?----(P.1-14)
■ Isn't the filter of the Barcode sensor dirty?
If the filter of the Barcode sensor is dirty, the Barcode may not be scanned correctly. Please
wipe the filter with a dry soft cloth.
■ Is the barcode of good quality?
If the barcode quality is bad, it may not scanned correctly, change the setting of the decode
level and scan again.
Q: How do I check the free area of a drive?
From the System Menu, select "8:Manage" , then Select "5
：
drive" to check the drive----(P.3-83)