Welcat GTX-100, Руководство пользователя

Страница: 143 / 171

Chapter 3 System menu
3-88
■WLAN/ping test
WLAN test is performed by executing the ping command. The ping packet is continuously transmitted
to the Host IP address setup at "Configuration". Displayed contents are the result of ping command,
the MAC address of the synchronized access point, communication quality (LinkQ), the received ra-
dio signal strength(ASL), applied channels and displayed.
1. Select "2:WLAN/ping test".
RKPI
2KPI6KOGQWV
0Q$[VGU
.PM3ǪǪǪǪǪǪ
%*
#5.ǪǪǪǪǪǪ
#2A/#%=#(#$?
*QUV
<1st line> The title of this test.
<2nd line> Host IP address to be communication tested
<4th line> The result is displayed.
When succeeded
Result time is displayed. (Unit: msec)
Time out
"ping Timeout" is displayed.
When interrupted by the key
"stopped" is displayed.
<5th line > Transmitted packet number(counted up one by one) and
packet size.
<6th line> LinkQ indicator is displayed.
LinkQ (means the communication quality to the access
point) is displayed.
<7th line> Synchronized channel are displayed.
<8th line> ASL indicator
ASL (means the strength of the radio signal received from
the access point) is displayed.
<10th line> MAC address of the access point while wireless commu-
nications is displayed.
To get the stable enough communication performance it is rec-
ommended that the indicator should be LinkQ 4 or more.
In the case of EAP authentication or PSK(TKIP/CCMP), an error
message is displayed when authentication is failed.
The LinkQ in the 6th line and the ASL indicator on the 8th line do
not show the strength of the radio signal correctly, just have this as
a remindar of the communication status.