Wega URBAN EVDP, Руководство по эксплуатации и обслуживанию

Страница: 47 / 272

USER Manual
ENGLISH
47
of
272
1.
INTRODUCTION
Please read this manual in its entirety before using
the device, in order to optimise machine performance
and operate it safely.
The espresso coffee machine you have purchased
has been designed and manufactured with innovative
methods and technologies which ensure long lasting
quality and reliability.
This Manual is the guide that will enable you to learn
about the benefits of choosing our brand. You will find
information on how to get the best out of your appliance,
how to keep it running efficiently and what you should
do if problems occur.
Keep this Manual in a safe place. If you displace this
Manual, please contact the Manufacturer to receive a
replacement copy.
Before using the machine, carefully read and follow the
instructions contained in this publication. Keep this manual
and all attached publications in an accessible and secure place.
This document assumes that the machine is installed in a location
where the current work safety and hygiene standards are observed.
Instructions, drawings and documentation contained
in this Manual are technical and confidential. They are
the sole property of the Manufacturer and may not be
reproduced in any way, whether in wholr or in part.
The Manufacturer reserves the right to make any
improvements and/or modifications to the product. We
guarantee that this Manual reflects the technical state of
the appliance at the time it was released to the market.
We take this opportunity to invite customers to make
any proposals to improve the product or its Manual.
1.1
Guidelines for reading the
Manual
This Manual is divided into separate chapters. The chapter order is linked
to the temporal logic of the life of the machine.
Terms, abbreviations and pictograms are used to facilitate the immediate
understanding of the text.
This Manual consists of cover, index and a series of chapters. Each chapter
is sequentially numbered. The page number is shown in the footer.
The first page displays the machine identification data and the last page
displays the date and revision of the Instruction Manual.
ABBREVIATIONS
Sec. = Section
Chp. = Chapter
Par.
= Paragraph
Pg. = Page
Fig.
= Figure
Tab.
= Table
UNITS OF MEASUREMENT
The units of measurement are those provided by the International System
(SI).
PICT OGRAMS
Descriptions preceded by these symbols contain very important informa-
tion/requirements, particularly in regards to safety. Failure to comply with
these may result in:
• hazards to the operator's safety;
• injury, including serious injury, to users (in some cases, even death);
• loss of warranty;
• mMnufacturer’s waiver of liability.
DANGER symbol used when there is a risk of permanent serious
injury that requires hospitalisation, or in extreme cases, cause
death.
CAUTION symbol used when there is a risk of minor injury that
could require medical attention.
WARNING symbol used when there is a risk of minor injury that
could be treated with first-aid or similar measures.
NOTE symbol used to provide important information about the
topic.
1.2
Storing the Manual
The Instruction Manual must be stored in a safe place and accompany the
machine in all ownership transfers.
The manual should be stored, handled with care with clean hands and
not placed on dirty surfaces. Do not remove, tear or arbitrarily modify any
of its parts.
The manual must be stored away from moisture and heat, and in close
proximity to the machine it refers to.
On the user's request, the Manufacturer can provide additional copies of
the Instruction Manual.
1.3
Method for updating the
Instruction Manual
The Manufacturer reserves the right to modify and make improvements
to the machine without providing notice or updating the Manual that has
already been received by the user.
Moreover, when substantial changes made to the machine require the
modification of one or more chapters of the Instruction Manual, the Manu-
facturer will send users the chapters affected by the changes or a revision of
the entire Manual.
It is the users' responsibility to replace the old document with the new
revision.
The Manufacturer is responsible for the Italian content. Translations cannot
be fully verified; therefore, in the event of inconsistency, users can refer to the
Italian version or if necessary, contact the Manufacturer who will make the
appropriate changes.