Wega URBAN EVDP, Руководство по эксплуатации и обслуживанию

Страница: 71 / 272

USER Manual
ENGLISH
71
of
272
8.3
Scheduled maintenance
If enabled, this function displays a message to alert
the user when it is necessary to perform scheduled
maintenance.
The first request for assistance appears when the
number of coffee, tea, heating unit filling cycles, or the
number of days elapsed since installation of the machine,
is close to the programmed threshold value.
After reaching the programmed threshold value, the
display shows the following message:
This message continues to be displayed until main-
tenance is performed.
If enabled, the display may show various scheduled
maintenance thresholds.
Warnings indicating that threshold are being ex-
ceeded or reached do not prevent the machine from
operating.
Messages on the display can be reset at any time
(even before the warning is triggered) by a technician.
When the machine is in operation, the system in-
creases both the cycle counter and time since installation
counter.
Contact a Qualified Technician to programme this function.
8.4
Grinder wear automatic check
If enabled, this function displays a message to alert
the user that it is necessary to replace the grinder-dis-
penser burrs.
The warning appears when the amount coffee (kg)
used reaches the programmed limit.
The message will remain on the display in the se-
lection standby phase or in the programming standby
phase.
The warning for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (even before the
alarm is triggered) and by a technician.
The system only operates if the machine is paired with a single
grinder. Contact a Qualified Technician to programme this function.
8.5
Water softener regeneration
The machine counts the water used and, where ap-
plicable, when the expected amount is exceeded, the
display indicates the need to regenerate the softner.
The warning for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (even before the
alarm is engaged) by a technician.
Contact a Qualified Technician to programme this function.
To regenerate the water softener, follow the manufacturer’s
recommendation.