WEG CFW501 V1.8X, Руководство по программированию, Страница: 69 / 192

Logical Command and Speed Reference
CFW501 | 7-11
7
P0690 – Logical Status 2
Adjustable
Range:
0000h to FFFFh
Factory
Setting:
Properties: ro
Access groups
via HMI:
NET, READ
Description:
Parameter P0690 presents other signaling bits for functions exclusively implemented in the CFW501. The
function of each bit of P0690 is described in
Table 7.4: Status word (P0680) on page 7-11 .
Table 7.4: Status word (P0680)
BIT Function Description
0 to 3 Reserved
4 Fs reduction
0: Output frequency reduction inactive.
1:
Output frequency reduction active.
5 Sleep State
6 Deceleration Ramp
0: No deceleration.
1: Inverter decelerating.
7 Acceleration Ramp
0: No acceleration.
1: Inverter accelerating.
8 Freeze Ramp
0:
Ramp operating in normal conditions.
1: The path of the ramp is frozen by some command source or internal function..
9 Setpoint Ok
0:
Output frequency has not reached reference yet.
1: Output frequency reached reference.
10 DC link regulation
0:
DC link regulation or current limitation inactive.
1: DC link regulation or current limitation active (P0150).
11
Configuration in
50 Hz
0:
Factory default loaded in 1800 rpm / 60 Hz (P0204 = 5).
1: Factory default loaded in 1500 rpm / 50 Hz (P0204 = 6).
12 Ride-Through
0:
No execution of Ride-Through.
1: Executing Ride-Through.
13 Flying-Start
0:
No execution of Flying Start.
1: Executing Flying Start.
14 DC Braking
0:
DC breaking inactive.
1: DC breaking active.
15 PWM Pulses
0:
PWM voltage pulses in the output disabled.
1: PWM voltage pulses in the output enabled.