WEG CFW501 V1.8X, Руководство по программированию, Страница: 20 / 192

Quick Reference of Parameters, Alarms and Faults
0-12 | CFW501
0
Param. Function Adjustable Range Factory Setting
User
Setting Propr.
Groups Pag.
P0513 Indirect Indication Form 2 0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz 1 HMI 5-9
P0516 Ref. Eng. Unit 4 See options in P0510 13 HMI 5-9
P0517 Indirect Indication Form 4 0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz 1 HMI 5-10
P0580 Fire Mode Configuration 0 = Inactive
1 = Active
2 = Active / P0134
3 = Active / P0581
4 = Active / Gen. Disable 0 cfg HVAC 18-30
P0581 Setpoint PID fire Mode -32768 to 32767 0 HVAC 18-30
P0582 Auto-reset configuration 0 = Limited
1 = Unlimited 0 cfg HVAC 18-31
P0583 Bypass Mode Configuration 0 = Inactive
1 = Active/DIx
2 = Active/DIx+Failure 0 cfg HVAC 18-34
P0584 Bypass Contactor time 0.00 to 300.00 s 0.30 s cfg HVAC 18-34
P0585 Short Cycle Protection Config. 0 = Inactive
1 = Active 0 cfg HVAC 18-3
P0586 Minimum RUN Time 0 to 650.00 s 5.00 s cfg HVAC 18-4
P0587 Minimum STOP Time 0.00 to 650.00 s 5.00 s cfg HVAC 18-4
P0588 Energy Saving Max. Torque 0 to 85 % 60 % cfg, V/f HVAC 18-2
P0589 Energy Saving Min. Mag. 40 to 80 % 40 % cfg, V/f HVAC 18-2
P0590 Energy Saving Min. Speed 360 to 18000 rpm 600 (525) rpm cfg, V/f HVAC 18-3
P0591 Energy Saving Hysteresis 0 to 30 % 10 % cfg, V/f HVAC 18-3
P0680 Logical Status Bit 0 = Not Used
Bit 1 = Run Command
Bit 2 = Fire mode
Bit 3 = Bypass
Bit 4 = Quick Stop
Bit 5 = 2
nd
Ramp
Bit 6 = Config. Mode
Bit 7 = Alarm
Bit 8 = Running
Bit 9 = Enabled
Bit 10 = Forward
Bit 11 = JOG
Bit 12 = Remote
Bit 13 = Subvoltage
Bit 14 = Reserved
Bit 15 = Fault
ro READ,
NET
16-2
P0681 Speed in 13 bits -32768 to 32767 ro NET 16-2
P0682 Serial/USB Control Bit 0 = Ramp Enable
Bit 1 = General Enable
Bit 2 = Run Forward
Bit 3 = JOG Enable
Bit 4 = Remote
Bit 5 = 2
nd Ramp
Bit 6 = Quick Stop
Bit 7 = Fault Reset
Bit 8....12 = Not Used
Bit 13 = Intern PID
Bit 14 = Extern PID
Bit 15 = Reserved
ro NET 7-12
16-2
P0683 Serial/USB Speed Ref. -32768 to 32767 ro NET 16-2