WEG CFW-11M RB, Руководство пользователя

Страница: 72 / 94

5
CFW-11M RB |5-3
First Time Power-Up and Start-Up
5.2.1 Password Setting in P0000
Step Action/Result Display Indication
1
- Monitoring Mode.
- Press
“Menu”
(rigth soft key).
Run RB + LOC 618 V
15:45 Menu
400 A
618 V
380 V
2
- Group “00 ALL
PARAMETERS” is
already selected.
- Press
“Select” .
Run RB + LOC 618V
Return 15:45 Selec.
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
3
- Parameter “Access to
Parameters P0000: 0”
is already selected.
- Press
“Select” .
Run RB + LOC 618V
Return 15:45 Selec.
Access to Parameters
P0000: 0
Line Voltage
P0002: 380 V
4
- To set the password, press
the Up Arrow
until
number 5 is displayed in
the keypad.
Run RB + LOC 618V
Return 15:45 Save
P0000
Access to Parameters
0
5
- When number 5 is
displayed in the keypad,
press
“Save” .
Run RB + LOC 618V
Return 15:45 Save
P0000
Access to Parameters
5
6
- If the setting has been
properly performed, the
keypad should display
“Access to Parameters
P0000: 5”.
- Press “Return”
(left soft key).
Run RB + LOC 618V
Return 15:45 Selec.
Access to Parameters
P0000: 5
Line Voltage
P0002: 380V
7 - Press ”Return” .
Run RB + LOC 618V
Return 15:45 Selec.
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
8
- The display returns to
the Monitoring Mode.
Run RB + LOC 618V
15:45 Menu
400 A
618 V
380 V
Figure 5.1 -
Steps for allowing parameters modification via P0000
5.2.2 Oriented Start-Up
There is a group of parameters named ”Oriented Start-up” that makes the converter settings easier. Within
this group there is a parameter P0317, through which it is possible to enter in the Oriented Start-Up routine.
The Oriented Start-Up routine presents the main parameters on the HMI in a logical sequence, so that their
setting, according to the operation conditions, prepares the converter for the operation with the used line
and motor.
In order to enter into the Oriented Start-up routine, follow the steps presented in figure 5.2, first modifying
parameter P0317 to 1 and then, setting all remaining parameters as they are prompted in the display.