WEG CFW-11M RB Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 94

background image

1-2 | CFW-11M RB

1

Safety Instructions

1.3 PRELIMINARY RECOMMENDATIONS

DANGER!

Only qualified personnel familiar with the CFW-11M RB regenerative frequency converter and
associated equipment should plan or implement the installation, start-up and subsequent maintenance
of this equipment.
These personnel must follow all the safety instructions included in this Manual and/or defined by
local regulations.
Failure to comply with these instructions may result in death, serious injury, and equipment damage.

NOTE!

For the purposes of this manual, qualified personnel are those trained and able to:

1. Install, ground, power-up and operate the CFW-11M RB according to this manual and the effective

legal safety procedures.

2. Use protection equipment according to the established regulations.
3. Provide first aid.

DANGER!

Always disconnect the main power supply before touching any electrical component associated to
the converter.
Several components can remain charged with high voltages and/or in movement (fans) even after
the AC power supply is disconnected or switched off.
Wait at least 10 minutes to assure a total discharge of the capacitors.
Always connect the equipment frame to the protection earth (PE) at the suitable connection point.

ATTENTION!

Electronic boards have components sensitive to electrostatic discharges. Do not touch directly
on components or connectors. If necessary, touch the grounded metallic frame before or use an
adequate grounded wrist strap.

Do not perform any withstand voltage test!

If necessary, consult WEG.

NOTE!

Regenerative frequency converter may interfere with other electronic equipment. In order to reduce
these effects, take the precautions recommended in the chapter 3 - Installation and Connection.

NOTE!

Read this manual completely before installing or operating the converter.

«
...
5
6
7
8
9
...
»

Содержание CFW-11M RB































































































Отзывы:

Нет отзывов

Похожие инструкции для CFW-11M RB

Бренд: Danfoss Страницы: 48

VLT 6000 HVAC Series

Бренд: Danfoss Страницы: 27

Бренд: Danfoss Страницы: 138

Бренд: Danfoss Страницы: 61

VLT 5000 Series

Бренд: Danfoss Страницы: 45

VLT 5000 Series

Бренд: Danfoss Страницы: 38

VLT 2800 Series

Бренд: Danfoss Страницы: 2

Бренд: Minarik Страницы: 2

300978U - d2 DVD±RW With LightScribe

Бренд: LaCie Страницы: 37

Бренд: iRZ Страницы: 134

Бренд: YASKAWA Страницы: 50

Бренд: Secure Data Страницы: 29

Бренд: Frecon Страницы: 47

Бренд: NEC Страницы: 14

Бренд: TOX PRESSOTECHNIK Страницы: 70

Бренд: Baldor Страницы: 48

Бренд: Tandem Страницы: 53

Бренд: Ricoh Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды