GRANUDOS Touch, control unit
Index: 02
Date modified: 11/06/2019
OI No.: BA SW 010-02 Granudos Touch-Steuereinheit EN SCHW 8.docx
Page 13 of 43
Operation display:
Depending on the operation state, the display shows different views. The following illustrates and describes the main display
views.
Start –Delay booster pump and dosing delay
If the device is restarted, the start delay circuit booster pump and
dosing delay runs while no dosing output is triggered.
Software alarms are suppressed during this time.
The device then switches to automatic operation
In the event of a booster pump delay, the indicated delay runs out and
the booster pump then starts.
(Serves to vent the supply line.)
The icon
(top right) can be used to switch to the "Buffer tank
operation" display.
If the dosing device is reset externally, dosing stops and the booster
pump runs on for a short time afterwards, so that there is no chlorine
remaining in the suction line.
Automatic operation
The device is in automatic operating mode. The device doses when
requested.
There is no disruption.
The
OUT
list shows the currently active outputs and/or actuators as an
example.
