GRANUDOS Touch, control unit
Index: 02
Date modified: 11/06/2019
OI No.: BA SW 010-02 Granudos Touch-Steuereinheit EN SCHW 8.docx
Page 10 of 43
6
Operation / service
NOTICE!
The nationally applicable accident prevention regulations must be observed.
6.1
General
Once all the preparations for commissioning have been completed, the settings can be made on the
GRANUDOS Touch dosing system.
6.2
Control unit GRANUDOS Touch
The GRANUDOS Touch control unit is equipped with a touch-sensitive display. Settings can be made by
tapping on a symbol. The adjustment menus come with additional text-based instructions.
Operation display – Automatic operation
The control unit of the GRANUDOS Touch is simple and easy to operate using a 7" touch display. The
operating modes and faults are displayed directly in the start screen: see
Automatic operation.
In automatic operation, the current operating status, fill levels, and active inputs and outputs are displayed (
IN
– OUT
). The inputs and outputs can be operation messages or fault messages.
Operating notes:
The operating status is displayed in the status line. The following operating states are available:
Dosing delay
Automatic
Manual dosing
Menu
Adjustment
Output test
Input test
The device is operated using a resistive touch display. Desired parameter changes, calibrations and tests can
be done simply by lightly touching the corresponding symbol or the numeric value.
1.
Fill level chlorine granulate
2.
Dust extraction (optional)
3.
IN
list
4.
OUT
list
5.
Status line
6.
Measuring value pH (optional)
7.
Switch over “start screen/buffer tank”
8.
Acid fill level
9.
Cancel alarm
10.
Start / Stop dosing device
11.
Activate / deactivate dosing manually
12.
Menu button
13.
Date / time bar
14.
User level (0=guest, 1=end user, 2=technician 1)
Figure 2, Automatic Operation, Start Screen
1
2
3
4
5
6
7
8
14
9
10
11
12
13
