GRANUDOS Touch, control unit
Index: 02
Date modified: 11/06/2019
OI No.: BA SW 010-02 Granudos Touch-Steuereinheit EN SCHW 8.docx
Page 6 of 43
2
Safety
2.1
Intended use
The GRANUDOS Touch control unit must only be used for the purposes described in the Product Description
in
Section 3.2, Product description
! The locally applicable regulations concerning accident prevention,
occupational safety and drinking water protection must also be observed!
2.2
Safety notices
Carefully read and comply with the operating instructions prior to install, maintenance and use of the device!
Work on the device and changes in the settings may only be carried out by properly instructed persons!
IT safety
The GRANUDOS Touch control unit makes remote display possible using network-enabled devices. The
operator is responsible for ensuring that only authorised persons can access the device. The operator, or his
authorised representative, is further responsible for the safety of all Internet or WLAN connections.
Handling of chemicals, risks to humans and the environment
In emergencies
when handling chemicals, you can also contact the emergency poison centre!
Emergency number:
Munich Emergency Poison Centre (or any other Poison Centre)
Phone: +49 89 19240
Excerpt from the Accident Prevention Regulations, GUV-V D 5
Installation rooms for chlorination systems and storage rooms
Section 3a. (1) Chlorination systems must be installed in lockable rooms and the chemicals intended for the
chlorination must be stored in lockable rooms.
Re Section 3a Para. 1:
This requirement ensures that chlorination systems and chemicals shall be protected against weather effects
and unauthorised access.
(2) Rooms in accordance with Para. 1 must not be intended for the permanent presence of persons.
Re Section 3a Para. 2:
…… A “permanent presence” is given when persons are present in the room for more than 2 hours per day.
Repair and maintenance work on the chlorination system are exempt from this.
Protective measures and rules of conduct
CORROSIVE!
The GRANUDOS Touch control unit controls devices that dose corrosive chemicals.
For this reason, it is essential that you observe the safety information relating to the
device!
ESD SENSITIVE!
The electronic components in the device controls are sensitive to electrostatic
discharge. For this reason, the generally accepted safety precautions for ESD-sensitive
devices must be observed when handling the devices, including:
Discharge of personal static charge
Dissipative clothing
Disconnect the device from the voltage supply
