GRANUDOS Touch, control unit
Index: 02
Date modified: 11/06/2019
OI No.: BA SW 010-02 Granudos Touch-Steuereinheit EN SCHW 8.docx
Page 19 of 43
b)
Main menu
Settings
System
Password
Guest (user level 0)
No password, read-only rights
End user (user level 1)
There is no factory setting for an end user password. We recommend
the assignation of an end user password to protect the system against
unauthorised access. Enter the password in the operation data sheet.
The individual end user password must contain four digits between
0000 and 9999. In the second line, the password must be entered once
again.
Technician 1 (user level 2)
The Technician 1 password consists of five digits and has a factory
default setting of 01234. This password is intended for service
partners. We recommend that you change this password as well and
enter it in the operation data sheet.
If you place a green check mark next to Clear text, the entered
numbers are shown instead of white dots.
To change an active end user password, it must be entered in the upper
line. The new password must be entered in the two following lines.
If you wish to delete the end user password completely, simply enter the active password in the upper line.
The other two lines remain clear.
If an incorrect password is entered, an error message appears.
NOTICE!
Please store the individually chosen passwords safely in the operation data sheet. Lost
passwords can only be reset by the factory customer service!
c)
Main menu
Settings
System
Display
The screensaver dims the background lighting after the set delay time
to the selected brightness.
The Test button can be used to test the settings.
The Backlight setting permanently reduces the background lighting in
the operating mode.
The boot logo may be displayed when the control unit is activated.
The screensaver may be activated or deactivated.
Save settings using OK and confirm instruction using OK .
