background image

 

 

Tone/Vibe Only Example: 

PagerID<CR><CR> 

 

Multiple Message Example: 

PagerID1<CR>Message1<CR>PagerID2<CR>Message2<CR> 

 

Forced Resynchronization Example: 

<DEL><DEL><DEL>PagerID<CR>Message<CR> 

 

Multiple Messages using Forced Resynchronization Example: 

<DEL><DEL><DEL>PagerID<CR>Message 1<CR><DEL><DEL><DEL>PagerID<CR>Message 2<CR> 

 

Function Code Control Example using Function Code B: 

PagerIDB<CR>Message<CR> 

 

When incoming data is detected on the serial port, 

one of three things will happen

1)

 The data in the serial port input buffer contains properly formatted 

COMP2

 command strings. 

2)

 A time period of approximately 10 seconds elapses after receipt of the last character on the serial port. 

3)

 256 characters or more accumulate in the serial port input buffer. The serial port data is analyzed character by 

character to see if a properly formatted command string exists. If the serial port data contains one or more properly 
formatted 

COMP2

 command strings, then the paging message(s) will be transmitted to the specified Pager ID(s) as long 

as those Pager ID(s) exist in the 

WaveWare v

9

 Paging Encoder’s

 Pager Database.  If a 

Pager ID

 doesn't exist in the 

pager database, an error message will be output in verbose mode by the paging encoder as follows: 

Invalid character in pager ID<CR><CR><RS><CR> 

Any portions of the serial port input buffer that don't meet the 

COMP2

 message formatting requirements are discarded.  

The original 

COMP2

 Protocol has an inherent weakness of using the 

<CR>

 character to delimit both the 

Pager ID

 Field 

and the Message Field. This approach allows the possibility of an extra or missing 

<CR>

 character to cause the host 

system and the paging system to get out of synch with each other, causing multiple paging messages to be rejected by 
the paging system.  A more robust version of the 

COMP2

 protocol uses Three 

<DEL>

 characters as indicators of the 

beginning of a 

COMP2

 command string.  The use of three 

<DEL>

 characters at the beginning of each output message 

assures that out-of-synch conditions will not occur. The forced resynchronization method is optional. As additional 
synchronization  insurance, the 

WaveWare COMP2

 implementation has been designed to stay in synch even if one or 

more 

<CR>

 characters immediately precede a properly formatted 

COMP2

 command string. 

If the 

10 Second Timeout

 occurs while waiting for all of the characters required for a properly formatted 

COMP2

 

message to arrive on the serial port, the data in the serial port input buffer will be discarded.  If 256 or more characters 
arrive in the paging encoder’s serial port input buffer, and the first 256 characters contain all of the elements of a properly 
formatted 

COMP2 

Command String except for the trailing 

<CR>

 character, then the 

<CR>

 will be assumed and only the 

first 256 characters of the input buffer will be processed as a valid 

COMP2

 paging message. 

If the serial port input buffer becomes filled with greater than 

600 

characters, the paging encoder will output either a 

hardware or software flow control response, depending upon how the system is configured. Once the serial port input 
buffer drops below 

450

 characters, the paging encoder will use flow control signals to indicate that it is no longer busy and 

that additional data can be delivered to the serial port. 

 

This Completes the “COMP2 Interface Specifications” 

Содержание SPS v9S


























































Отзывы: