Range Test Function
This Function is to help test the
“
Coverage Area
”
of the transmitter.
To use the
“
Range Test
”
, you must first enter in a
“Pager ID”
(A)
and the
“Pager ID”
must be valid in the Database.
After
you enter the
“Pager ID”,
then you can click
“Start Range Test”
. See Fig. 22
Fig. 22 (Range Test Function)
Range Test Setup
In this screen you can use the Default
“Test”
message or type any message in the
“Base Message”
Field
(A)
.
See Fig. 23
Fig. 23 (Range Test Setup)
A
: Base Message
= Use Default Message
“Test”
or any Custom message you want.
B
: Pin =
Use the
Pager ID
you entered in previous screen or type another Pager ID you want to use.
C
: Cycle Time
= Default is
30 seconds
but you may enter a different cycle time.
D
: Start / Cancel
= When ready click
“Start”
to begin test. When finished click
“Cancel”
to end the Range Test.