On the Main Screen of Encoder Setup Program, Click on “
Group Paging
” to Open the Pager Database.
See Fig. 8
Fig. 8 (Group Paging)…Configuration for Both of the v
9 Series
Paging Systems
Pager Groups Screen:
Enter The Group ID and list the pager ID’s you want in that group. The ID’s must be in the Pager
Families, programmed previously.
Note:
In most cases you would use a “
Common
” Pager Cap Code in the Pager
themselves instead of using Pager Groups. Using a Common Cap code will page all pagers at the same time; whereas
using a group will page each pager one at a time, which is slow.
Pager Groups would be used primarily when “
Timer Active
” Mode is needed.
When finished,
Click
“OK”
See Fig. 9
Fig. 9 (Pager Groups Setup) If Group 1 is
RED
, click on the Box to Activate that Group, it will turn
Green
.
