On the Main Screen of Encoder Setup Program, Click on the “
Pager Families
” Icon to Open the Pager Database.
See Fig. 6
Fig. 6 (Open the Pager Database)…Configuration for Both of the v
9 Series
Paging Systems
Pager Families Screen:
Enter Quantity, Pager ID’s, 7-Digit Cap Code, Baud Rate, Pager Type and Function code.
Function Code 4 is normally for Alphanumeric Pagers and Function Code 1 is normally for Numeric Pagers.
When Finished,
Click
“OK”
See Fig. 7
Fig. 7 (Enter Pagers in the Database) If Family 1 is Red, Click to Activate and to Add Pagers, it will turn
Green
.
For Programming of the Pager Groups – (See Next Page).
