Programming, Reading and Saving the Pager Database and Settings
On the Main Screen of Encoder Setup Program, Click on the
“Program Encoder”
Icon to program the Encoder.
Programs the SPS-5
v
9
’s
Pager Database and all Settings.
See Fig. 17
Fig. 17 (Programs Both of the SPS-5 v
9
Series
Encoders)
On the Main Screen of Encoder Setup Program, Click on the
“Read Encoder”
Icon to see the Database information.
Used when you want to check to be sure everything you have programmed into the database was saved and is correct.
See Fig. 18
Fig. 18 (Reads Both of the SPS-5 v
9 Series
Pager Database and all Settings)
Saving the Database and Settings: See Next Page.
