1
This information sheet is provided as a reference in consultation
with your local Visiting Teacher.
How to Connect the Roger Select
Microphone/Transmitter
The Roger Select must be fully charged before use. Charge for three hours minimum.
To turn on the microphone, press on/off button, hold for three seconds
When the microphone is switched on, the status light around the on/off button will
blink
A green blinking light means battery is fully charged
An orange blinking light means battery is half full
A red blinking light means battery empty
A blue blinking light means the device is connecting
Connecting the microphone to your receivers:
The Roger receiver must be attached to the hearing aid or cochlear processor
Turn on the microphone
Place the Roger microphone within 4cm from the Roger receiver.
Press the connect icon/ button on the back of the Roger microphone. Press once and
let go. The back indicator light will turn green for two seconds to indicate the
connection was successful.
On/Off button
Microphones
/centre lights
Microphone
indicator lights
Centre touch key
