Waves HPSA-7100-R Series, Инструкция по установке и эксплуатации

Страница: 48 / 179

Installing the Speaker Array
22 HPSA-7100-R Series Installation and User Manual
P/N P01- 04946 Rev C
FIGURE 3.7 Verify Gap Distances Between Drivers are Equal
For Uni-directional Mounting:
a. Position the speakers facing the same direction around the pole, allowing the
extension cable to drop through the siren recess (hanging down).
FIGURE 3.8
Positioning Uni-directional Speakers
The edges of the speakers must be mounted with approximately 1/2” to 1”
gap between each set of speakers. The speaker edges must not touch.
Verify the gap distance between the speaker edges is equal on each side of
the pole; if the gap is not equal, additional speakers added to the system will
not properly line up.