Waves HPSA-7100-R Series, Инструкция по установке и эксплуатации

Страница: 106 / 179

Activating the HPSA-7100-R
80 HPSA-7100-R Series Installation and User Manual
P/N P01- 04946 Rev C
HPSA Amp/
Driver Test HPSA Test Initiated : Initiates a
silent test.
This menu does not time-out.
Done : Returns the screen to the
main menu.
Test Again : Re-initiates the silent
test.
Setup Menu Set LCD Contrast : Adjusts the
LCD screen contrast.
Set LCD Backlight : Adjusts the
intensity of the LCD screen
backlight.
Get/Set Msg Priority : This option
is non-functional. It is for future
use.
This menu has a 60-second time-out
setting.
Up : Increases the LCD contrast
and/or intensity of its backlight.
Down : Decreases the LCD contrast
and/or intensity of its backlight.
Back : Returns the screen to the
Setup menu.
Maintenance
Menu Show LID Revision : Displays the
Control Panel revision level and
date of revision.
Show HPSA Revision : Displays
DC revision level and date of
revision.
PA ON w/ External Input : This
function is used for factory testing.
PA OFF : This function is used for
factory testing.
Show Software Build Time :
Displays the date and time the
Control Panel software was
compiled.
Show Elapsed Run Time :
Displays the Control Panel run time
in hours, minutes, and seconds.
This menu has a 60-second time-out
setting.
Back : Returns the screen to the
Maintenance menu.
TABLE 7.5
HPSA-7100-R Control Panel Commands Descriptions (continued)
Main Menu Sub-Menu/Screen Sub-Menu Command Buttons