Waterous Pressure Governor, Инструкция по установке и эксплуатации

Страница: 33 / 53

33
|
53
Safety Introduction Product Overview Installation Operation
Connecting the Cable—Power, Alarm, SAE CAN (J1939), and Inlet Pressure Sensor
2
3
4
5
1
Use the illustration and instructions to connect the
cable to the appropriate component or controller.
Use the wire label to determine the appropriate
connector.
1 Connect the appropriate connector to the
pressure governor.
2 Connect the appropriate connector to the intake
pressure sensor.
3 Connect the appropriate connector to the SAE
CAN bus controller.
4 Connect the appropriate wire to the alarm
controller.
5 Connect the appropriate connector to apparatus
power.