Waterous Pressure Governor, Инструкция по установке и эксплуатации

Страница: 7 / 53

7
|
53
Safety Introduction Product Overview Installation Operation
System Overview
The Waterous pressure governor uses various apparatus inputs to control the engine speed and discharge pressure. Additional control and information is
available through configuration settings and cable selection. Operating modes are available when interlock settings permit.
Speed Mode
This mode prioritizes the engine speed.
The pressure governor uses SEA J1939
protocol to control the throttle and
maintain the engine speed set-point.
Idle Mode
This mode brings the engine speed to
idle. The pressure governor uses SEA
J1939 protocol to control the throttle
and bring engine speed to the idle
set-point.
Pressure Mode
This mode prioritizes the pump-discharge
pressure. The pressure governor manages
the engine speed to maintain the pressure
set-point.