Waterous Pressure Governor, Инструкция по установке и эксплуатации

Страница: 20 / 53

20
|
53
Safety Introduction Product Overview Installation Operation
Installation Overview
This equipment is intended to be installed by a person or persons with the basic
knowledge of installing similar equipment. Contact Waterous with questions
about installing the equipment. The installation may require the following tasks
and abilities:
• Locating, drilling, and cutting
features into the apparatus.
• Connecting electronic devices.
• Configuring and calibrating the
system.
• Final testing.
• Do not install the equipment if you are not familiar with the tools and skills
needed to safely perform required procedures—proper installation is the
responsibility of the purchaser.
Determining Cable and Wire Routing
Use the Wiring Best Practices document, available at www.waterousco.com , as
a guide to select and route wiring for your application.
Preparing for the Installation
Read and understand all the installation instructions before installing the
equipment. Prepare a suitable, well-lit area, and gather all the necessary tools
before you begin the installation.
NOTICE
Before Operation
• Read and understand all
the instructions provided.
• Check all fluid levels
and replenish if necessary.
• Remove all shipping plugs
and install the operation
plugs or caps.