WÄRTSILÄ PAAE051728, Инструкция по эксплуатации

Страница: 87 / 394

04.2
Every second day, irrespective of the engine being in operation or
not
Automatic prelubrication
Check operation
03.2
18.9
Crankshaft Marine engine:
In a stopped engine, turn the crankshaft into a
new position.
03.1
04.3
Once a week irrespective of the engine being in operation or not
Start process
Test start (if the engine on stand-by).
03.2
04.4 Interval: 50 operating hours
Air coolers Check draining of air coolers 15.5
Check that the draining pipe is open, check if any leakage. 03.4.1
Cooling water system
Check water level in cooling system
19.1.3
Check the water level in the expansion tank(s) and/or the static
pressure in the engine cooling circuits.
Connecting rod
Check tightening of the connecting rod screws
11.3.5
Check the tightening of the connecting rod screws after the first 50
operating hours on a new engine and, after overhaul, those screws
that have been opened.
Note! Pump to stated pressure. Tighten if possible. Do not loosen!
07.3
Crankshaft Check tightening of the counterweight fastening nuts
07.3
Check tightening of the counterweight fastening nuts after 50
running hours. Pump to stated pressure. Tighten the nuts if possible.
Do not loosen.
Gauges and indicators Take readings 03.4.1
Read and record (using eg. form No. WV98V091) all temperatures
and pressures, and at the same time the load of the engine.
Governor, actuator
Check oil level in governor
02.2.4
Check oil level, and look for leaks 22.4.1
Fuel filter
Check pressure drop
The cartridges are to be replaced when the pressure difference
indicator shows too high pressure drop. See manufacturers
instructions.
Injection and fuel system Check leak fuel quantity 03.4.1
Check the amount of leak fuel from the injection pumps and
nozzles. 17.1
Injection pipes
Check tightening of injection pipe connections
16.3
Check the tightening of injection pipe connections on a hot engine
after the first 50 operating hours on a new engine and, after
overhaul, those connections that have been opened. 07.1
Lubricating oil filter Check pressure drop 03.4.1
Clean or change filter candles if high pressure drop is indicated. 18.7
Lubricating oil sump
Check oil level in sump
18.2
Check oil level by means of dip stick, compensate for consumption.
Continue
02.2
32-200623-01 Maintenance Schedule 04
WÄRTSILÄ 32 04 - 3