WÄRTSILÄ PAAE051728, Инструкция по эксплуатации

Страница: 64 / 394

Page
4 (7)
Document No
4V92A0645
Rev
j
GAS OIL AND MARINE DIESEL OIL OPERATION
If gas oil or marine diesel oil is used as fuel, lubricating oils with a BN of 10-25 are
recommended to be used. Also BN 30 lubricating oils included in Table 3 can be used in
gas oil and marine diesel oil fuelled engines.
Table 1.
Approved system oils - fuel categories A and B, recommended in the first place in gas oil or
marine diesel oil installations:
SUPPLIER BRAND NAME VISCOSITY BN FUEL
CATEG.
BP Energol HPDX 40 SAE 40 12 A
Castrol HLX 40
MHP 154
Seamax Extra 40
SAE 40
SAE 40
SAE 40 12
15
15 A
A,B
A,B
Chevron (Texaco
+ FAMM) Delo 1000 Marine 40
Delo 2000 Marine 40
Taro 12 XD 40
Taro 20 DP 40 SAE 40
SAE 40
SAE 40
SAE 40 12
20
12
20 A
A,B
A
A,B
ExxonMobil Mobilgard ADL 40
Mobilgard 412
Mobilgard 1 SHC SAE 40
SAE 40
SAE 40 15
15
15 A,B
A,B
A,B
Indian Oil
Corporation Servo Marine 1040
Servo Marine 2040 SAE 40
SAE 40 10
20 A
A,B
Petrobras Marbrax CCD-410-AP
Marbrax CCD-415
Marbrax CCD-420
SAE 40
SAE 40
SAE 40 12
15
20 A
A,B
A,B
Shell Gadinia Oil 40 SAE 40 12 A
Statoil MarWay 1040 SAE 40 10.6 A
Total / Lubmarine Disola M 4015
Disola M 4020 SAE 40
SAE 40 14
20 A
A,B
HEAVY FUEL AND CRUDE OIL OPERATION
Today’s modern trunk piston diesel engines are stressing the lubricating oils heavily due to
a.o. low specific lubricating oil consumption. Also ingress of residual fuel combustion
products into the lubricating oil can cause deposit formation on the surface of certain
engine components resulting in severe operating problems. Due to this many lubricating oil
suppliers have developed new lubricating oil formulations with better fuel and lubricating oil
compatibility.
Table 2.
Approved system oils - fuel categories C and D, recommended in the first place when
operating on heavy fuel and or on crude oil having high sulphur content in order to reach full
service intervals. BN 50-55 lubricating oils are preferred in the first place.