WÄRTSILÄ PAAE051728, Инструкция по эксплуатации

Страница: 10 / 394

Identified hazard,hazardous situation or
event
Chapter of engine manual
3 4 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Inhalation of exhaust gas dust x x x x x x x
Explosion or fire if flammable gas/vapour is leak-
ing into the insulation box.
4)
x x
Touching of moving parts x x x x x x x x x x x x x x x
High pressure hoses, risk of oil spray. x x x x x x x x x x x x x x
1)
Warning light when turning device engaged.
2)
Suction air to be taken from gas free space.
3)
Require proper ventilation of engine room/plant.
4)
Require proper ventilation and/or gas detector in the engine.
00A.1.1 General identified hazards, hazardous situ-
ations or events
00A.1.1.1
Hazards that may be due to moving parts
·
Running engine without covers, coming in contact with mov-
ing parts,
·
Touching pump parts during unintentional start of el. driven
pump motor,
·
Charger starts to rotate due to draft if not locked during
maintenance,
·
Somebody sticks his hand into the compressor housing when
the silencer is removed and engine running,
·
Unexpected movement of valve or fuel rack(s) due to broken
wire or soft / hardware failure in the control system,
·
Unexpected movement of components,
·
Turning device engaged during maintenance work,
·
Turning device not engaged e.g. Turning device removed for
overhaul, during maintenance work could cause rotating
crankshaft,
·
Mechanical breakage (of e.g. speed sensor) due to erratic
actuator assembly to engine or electrical connections.
00A.1.1.2
Hazards that may be due to incorrect operating con-
ditions
·
Overspeed or explosion due to air-gas mixture in the charge
air,
·
Overspeeding due to air-oil mist mixture in the charge air,
·
Malfunction of crankcase ventilation,
·
Oil mist detector will trip if water is present in lubricating oil,
Appendix A Risk Reduction 200343
00A - 2