Wanroy WYIN36, Руководство пользователя, Страница: 73 / 84

5.2 Installation Position
5.2.1 Basic Requirements
Before the installation, check whether the components are complete according to the table.
Do not install in the storage area of flammable and explosive materials.
If the accumulator is installed in a salt-affected area, corrosion and fire may occur.
Therefore, do not install it in salt affected areas. A salt hazard area is defined as an area less
than 500 meters from the coast or that will be affected by sea breezes. The areas affected by
sea breezes vary depending on meteorological conditions (such as typhoons, monsoons) or
topographic conditions (DAMS, hills).
Do not install it where children can touch it
The energy storage device cannot be installed forward, horizontal, reverse, backward
or sideways.
Wear safety goggles and protective gloves when drilling holes in walls or on the ground.
During drilling, the equipment should be protected to prevent debris from entering. After
drilling, clean up debris in time.
When carrying any heavy objects, be prepared to bear them to avoid crushing or sprain.
Wear protective gloves when operating the equipment with bare hands to avoid injury
WY51100
When the product is heavy,
Do not carry alone
To avoid crushing or sprain
71