Wanroy WYIN36, Руководство пользователя, Страница: 44 / 84

A. Charge/Discharge Time Setting
Can set: 1 Charging time; 2 Discharging times
1) BMS Type: Battery charging and discharging maximum current mode(0: Default 1: Battery
Control Charging Maximum Charging Current; 2: Battery Control Charging and Discharging
Maximum Current).
2) BAT Cap setting: This parameter is used to set the capacity (in Ah) of the battery. This setting
is only applicable in lead-acid battery mode.
3) Dis Min V setting: This parameter is used to set the minimum discharge cut-off voltage.
4) Chg Max V setting: This parameter is used to set the maximum charging shutdown voltage.
5) Dis Stop SOC Setting: This parameter is used to set the stop discharge state of charge(SOC)
for the battery.
6) BAT Type: Set the battery type (0: lead-acid battery; 1: lithium battery)
7) Chg Limit: Set the maximum charging rate for the battery.
8) DisChg Limit: Set the maximum discharge rate for the battery.
9) BAT Factory: BMS Protocol Selection. This parameter is used to set the communication
protocol of the battery management system(BMS) for the inverter.
(0: Donnergy CAN; 1: PYLON CAN)
10) Float V Setting: This parameter is used to set the float charge voltage for the battery.
11) BMS cell type: Set the number of battery cells (0: Custom; 1: 16 strings; 2: 15 strings. the
default is 16 strings.)
WYIN5K
42