Wanroy WYIN36, Руководство пользователя, Страница: 50 / 84

6. Turn On/Off the Inverter
7. Maintenance and Cleaning
6.1 Turning On the Inverter
6.2 Disconnecting the Inverter
7.1 Thermal check
7.2 Inverter cleaning
7.3 DC Switch Inspection
(1) Turn on the AC circuit breaker
(2) Turn on the PV DC switch
(3) Turn on the battery breaker
(4) When the photovoltaic voltage is higher than 150V or the battery voltage is higher than 42V, the
inverter will automatically start (the screen light up, and it will enter standby mode)
(1) Disconnect the AC circuit breaker to prevent the inverter from being reactivated.
(2) Disconnect the battery breaker to ensure the inverter cannot be reactivated.
(3) Turn off the PV switch
(4) Verify the inverter’s running status
(5) Wait for the LCD screen to turn off before assuming the inverter shuts down completely.
If the inverter often frequently reduces output power due to high temperature, please check
whether the inverter is covered or clean the radiator to improve heat dissipation. You may also
need to adjust the inverter’s heat dissipation environment.
If the surface of the inverter is dirty, please turn off the inverter before cleaning the shell.
Regularly check inspect the circuit breaker and the cable for ant abnormalities. If you notice any
signs of damage, such as visible discoloration or physical damage to the cable or the circuit
breaker, please contact the installer for assistance.
WYIN5K
48