Wanroy WYIN36, Руководство пользователя, Страница: 15 / 84

The inverter should not be installed in direct contact with water or exposed to direct sunlight.
The inverter should be installed at a minimum height of 91.4cm (3 feet) above the ground.
The wall on which the inverter is installed must be sturdy and capable of bearing the weight of
the inverter for an extended period of time.
The humidity around the inverter should be between 0 - 95%, without any condensation.
The installation location should be conveniently accessible for future maintenance.
Do not install the inverter on buildings made of flammable or non-heat-resistant materials.
Be sure that the inverter is out of the reach of children.
Do not cover or place anything on the inverter.
Avoid installing the inverter near strong magnetic signals, such as TV antennas, other antennas,
or cables, and ensure that there is sufficient space for cooling the inverter.
These are guidelines for the installer to select a suitable location for installation, in order to avoid
potential damages to the device and operators.
3.6 Basic installation requirements
This inverter is designed to be used with PV generation, and cannot be connected to other
renewable energy devices.
Both AC and DC voltage sources are terminated inside the PV Inverter. All AC and DC
input and output must be disconnected before performing any maintenance.
This unit is intended to supply power to the public grid only. Do not connect it to a generator
or any other external power generating device, as it may cause severe damage to your
equipment.
Due to the DC capacitance inside the inverter, there may still be high voltage inside the PV
inverter even after the device is disconnected from the grid and PV panels.
Although the product is designed to comply all safety regulations, some parts and surfaces
of the inverter generate high heat during operation. To reduce the risk of injury, avoid
touching the heat sink on the sides and back of the unit while the inverter is in operation.
WYIN5K
13