Wanroy WYIN36, Руководство пользователя, Страница: 65 / 84

2.5 Installation Environment Requirements
2.4.2 Grounding Requirements
When the cable is used in a high temperature environment, the insulation layer of the cable
may age or be damaged. Therefore, the distance between the cable and the heat source
must be at least 30mm.
Cables of the same type should be bundled together. However, different types of cables
should be kept at least 30mm apart and should not be wound together or used across.
Before installing the device to be grounded, install the grounding cable. When removing the
device, remove the protection ground cable at the end.
Do not damage the ground conductor.
Do not operate the device without a ground cable.
The device should be permanently connected to the protection grounding cable. Before operating
the device, check the electrical connections of the device to ensure that the device is grounded
reliably.
This device is for indoor use only, do not use this product in outdoor environment.
Do not install or use the device in a temperature lower than -10°C or higher than 50°C.
The highest altitude at which this equipment can be installed is 2000 meters.
This product should be installed in a dry, well-ventilated environment to ensure good heat
dissipation performance.
The installation location should be away from the fire source.
The device should be installed and used away from children and animals.
The installation location should be away from water sources, such as taps, sewage pipes
and sprinklers, to avoid water entering the equipment.
The device shall be placed on a firm, flat supporting surface.
Do not place any flammable or explosive materials around the device.
When the device is running, do not block the ventilation holes or heat dissipation system to
avoid fire caused by high temperature.
WY51100
63