Wallenstein P3 PULSE WP1624, Руководство оператора

Страница: 56 / 88

Transport
WP1624 Series
Firewood Processor
56
10.4 Attach and Unhook
Make sure the area in front of the machine is clear of debris and
other equipment.
1. Using the trailer jack, raise the firewood processor so that
the coupler is higher than the ball hitch on the tow vehicle.
01735
1
Fig. 71 –
Trailer jack
2. Slowly back the tow vehicle until the hitch coupler and the
ball are aligned.
3. Open the coupler latch.
4. Lower the crank jack so the hitch coupler slides over the
ball.
5. Flip the coupler latch to lock the coupler around the ball.
6. Install the snapper pin through the coupler latch.
7. Attach the safety chains securely. Cross the chains under
the hitch.
8. Connect the light harness and check the function of all
lights.
9. Raise the front jack up all the way.
10. Reverse procedure when unhooking. Make sure there is
enough space behind the machine to safely back up into
position.
00354
1 2 3
4 5
Fig. 72 –
Attaching to a Tow Vehicle
1. Hitch Coupler
2. Trailer Light Harness
3. Coupler Latch 4. Safety Chains Crossed
under Trailer Tongue
5. Trailer Breakaway System
Cable