Wallenstein P3 PULSE WP1624, Руководство оператора

Страница: 39 / 88

WP1624 Series
Firewood Processor
Machine Setup
39
6.4 Log Stop Guide
Position the log stop guide for desired firewood length and
consistent saw cuts.
• Turn the lock handle counterclockwise to loosen the guide.
Move it into position, then turn the handle back clockwise
to tighten it.
00360
Fig. 29 –
Log Stop Guide Lock Handle
• The spring-loaded indicator can be locked at any desired
position along the slide. For reference, follow the decal on
the back of the splitter hopper, or use the vertical slotted
holes in the back plate. Each hole is 2 inches (5 cm) apart.
• Advance the log up to the stop for each cut.
00390
Fig. 30 –
Log Stop Guide
6.5 Saw Shield
• Adjust the position of the saw chain shield as required.
• Replace the impact-resistant glazing if any scratches or
other damage cause glare from the sun or obstruct the
operator's view.
01050
Fig. 31 –
Saw Shield