manualshive.com logo in svg

Wallenstein P3 PULSE WP1624, Руководство оператора

Поделиться
Скачать
Wallenstein P3 PULSE WP1624 Скачать руководство пользователя страница 63

WP1624 Series 
Firewood Processor

Service and Maintenance

63

12.3 Change the Hydraulic Oil

 CAUTION!

Risk of burns to exposed skin. 

Hydraulic oil becomes hot during 

operation. Hoses, lines, and other 

parts become hot as well. Wait for 

the oil and components to cool 

before starting any maintenance or 

inspection work.

W028

Change the hydraulic oil in the reservoir at 

100 hours 

of 

operation or annually. 

• 

Hydraulic oil type: 

Dexron III ATF. 

• 

Hydraulic oil tank capacity: 

26 US gal (102 L)

The hydraulic tank drain plug is located under the machine. A 
3/8" Allen wrench is required to remove it.

01058

3/8"

Fig.  77 – 

Hydraulic Tank Drain Plug

Procedure

1. 

Have a drain pan ready of suitable capacity.

2. 

Clean the area around drain and remove the drain plug.

3. 

Allow the oil to fully drain, then flush the tank. Dispose of 
used oil in an environmentally acceptable fashion.

4. 

Install the drain plug.

5. 

Change the return oil filter before filling the tank.

12.3.1 Change the Hydraulic Return Oil 

Filter

The hydraulic return filter is located on top of the hydraulic oil 
tank. 

A bypass indicator gauge is located above the engine controls 
on the side panel. If the gauge indicates the filter is bypassing, 
the filter is clogged and must be changed at the time the oil is 
changed.

01439

Fig.  78 – 

Return Filter Bypass Indicator Gauge

Procedure

1. 

Remove the hydraulic cover. 

00321

Fig.  79 – 

Hydraulic Oil Reservoir Cover

2. 

Have a drain pan ready to catch any dripping oil.

Содержание P3 PULSE WP1624

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды