manualshive.com logo in svg

Wallenstein P3 PULSE WP1624, Руководство оператора

Поделиться
Скачать
Wallenstein P3 PULSE WP1624 Скачать руководство пользователя страница 55

WP1624 Series 
Firewood Processor

Transport

55

10.  Transport

IMPORTANT!  Equipment that is transported on a public 
roadway must comply with the local laws that govern the 
safety and transport of machinery.
Before taking the machine on a public roadway, install the 
required lighting, reflectors, and markings, and make sure 
that they are in good working condition. 
For specific requirements, contact your local transportation 
authority.

10.1 Transport Safety

• 

Make sure that the machine is securely attached to the tow 
vehicle with a retainer through the hitch. 

• 

Always attach the safety chains between the machine and 
the tow vehicle.

• 

Never allow riders on the machine.

• 

Do not exceed a safe travel speed. Slow down for rough 
terrain and cornering.

• 

Plan your route to avoid heavy traffic.

• 

Do not transport or move the machine with the engine 
running.

• 

Inspect the wheel rims for dents or damage and tighten the 
wheel lug nuts to the specified torque.  
For more information, see page

 82

.

• 

Inspect the tires for cuts or damage.

• 

Make sure the tires are filled to the specified pressure. For 
correct tire pressure, see the tire sidewall.

• 

Make sure the tow vehicle is fitted with the correct size ball-
mount hitch (2 inches).

• 

Secure all the machine guards, shields, and covers.

• 

Make sure that the fuel tank, oil tank, and hydraulic 
reservoir caps are installed and secure (to prevent spills 
during transport).

• 

Remove all debris from the machine.

• 

After the machine is prepared for transport, complete a 
circle check to make sure everything is safe, secure, and 
functions correctly.

• 

Never exceed 50 mph (80 km/h). Slow down when 
cornering or encountering rough road conditions.

10.2 Prepare the Machine for 

Transport

1. 

Clear out all logs and clean all debris from the firewood 
processor. 

2. 

Raise the live deck to the vertical transport position.

3. 

Remove or secure any loose objects. Place tools in the 
toolbox.

4. 

Set the conveyor to the transport position. 

10.3 Raise the Live Deck

1. 

Remove the hitch pins and swing the support legs up. 
Reinsert the hitch pins. 

2. 

Pull out the lock pins and push the live deck up fully 
vertical. (Approximately 50 lb [23 kg] force required.)

3. 

Reinstall the pins to lock it.

00307

Fig.  70 – 

Raise Live Deck

Содержание P3 PULSE WP1624

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды