81
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
End flushing
The FLUSHING push button normally starts the end flushing of the last
paint recipe used.
1. Stopping the system.
2. For electrostatic spray guns: switch off electrostatics.
3.
Actuate FLUSHING push button.
4. Point the opened gun(s), with or without nozzle, into a waste tank until the flushing
process has been terminated.
During flushing, the blue FLUSHING push button lights up. The screen gives step by step
information about the individual flushing steps.
B_05236
Flushing valve currently open
Current flushing recipe
Flushing step 1 of 5
Progress indication
Guns to open during this flushing step.
Gun symbol flashes Open gun.
Step
1
3
Finally, all valves are closed.
If cleaning is insufficient, flushing can be repeated. The flushing recipe can be corrected
subsequently.
Flush with external mixer
Setting
"Flushing ext.
mixer is standard" *
FLUSHING push button
On
Starts the mixer flushing ("Mix") of last paint recipe used.
Flushing from external mixer.
Off
Starts the end flushing ("End") of the last paint recipe used.
* see Chapter
Atomizing air flushing
The system can be set such that the atomizing air remains switched on for flushing during
a certain time. Thus, the mixed product in the hose can be sprayed. A short flushing pause
indicates that the remainder has to be sprayed into the waste tank. (Settings, see
Chapter
