WAGNER 2K COMFORT Скачать руководство пользователя страница 7

Страница: 7 / 128

OPERATING MANUAL

VERSION 05/2017

ORDER NUMBER DOC 2357061

ABOUT THESE INSTRUCTIONS

1.1

PREFACE

The operating manual contains information about safely operating, maintaining, cleaning

and repairing the device.

The operating manual is part of the device and must be available to the operating and

service personnel.

The device may only be operated by trained personnel and in compliance with this

operating manual.

Operating and service personnel should be instructed according to the safety instructions.

This equipment can be dangerous if it is not operated according to the instructions in this

operating manual.

1.2

WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

Warning instructions in this operating manual highlight particular dangers to users and to

the device and state measures for avoiding the hazard. These warning instructions fall into

the following categories:

DANGER

Immediate risk of danger.

Non-observance will result in death or serious injury.

WARNING

Potential risk.

Non-observance may result in death or serious injury.

CAUTION

Potentially hazardous situation.

Non-observance may result in minor injury.

NOTICE

Potentially hazardous situation.

Non-observance may result in damage to property.

Note

Provides information about particular characteristics and how

to proceed.

Explanation of warning:

LEVEL OF DANGER

This notice warns you of a hazard!

Possible consequences of not observing the warning instructions.

The measures for preventing the hazard and its consequences.

Содержание 2K COMFORT

































































































































Результаты поиска

Содержание 2K COMFORT

Отзывы:

Похожие инструкции для 2K COMFORT

Бренды по названию

Популярные бренды

WAGNER 2K COMFORT, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание 2K COMFORT

Отзывы:

Похожие инструкции для 2K COMFORT

Бренды по названию

Популярные бренды