110
OPERATING MANUAL
VERSION 05/2017
ORDER NUMBER DOC 2357061
13 ACCESSORIES
The system is ordered and supplied including all desired accessories.
It is possible for a WAGNER technician to install extensions and accessories later on, e.g.,
paint extension, gun monitoring, air bubble monitoring etc.
13.1 CONNECTIONS
There are five types of connectors:
Digital outputs Digital inputs High-speed counters Analog outputs Analog inputs
Before the installation of an accessory set, it must be checked whether enough room in the
fluid cabinet and enough connections in the control cabinet are available:
1. Open on the 2K COMFORT USB stick (see Chapter
required set.
2. Check based of the assembly manual, whether enough room is available in the fluid cabinet.
3. For number and type of the required connectors please look into the assembly manual.
4. Check whether sufficient free connections are present in the control cabinet:
− Either in the 2K COMFORT connection table: each sufficient free lines must be
present of the required connection types (see Chapter
).
− Or in the controller: password level 3 "Menu" "I/O Config"
(see software documentation).
13.1.1 I/O EXTENSION MODULE
If too few connections are available, the set "CAN I/O extension module" can be installed
by a WAGNER technician. This includes:
CAN I/O extension module: number of connections
Serial number 1 – 99
from serial number 100
Digital outputs
16
24
Digital inputs
16
8
High-speed counters
2
Analog outputs
2
Analog inputs
4
A maximum of total 4 I/O modules can be installed in the control cabinet.
