background image

11

OPERATING MANUAL

VERSION 05/2017

ORDER NUMBER DOC 2357061

CORRECT USE

2.1 

DEVICE TYPES

a) 2K COMFORT

b) 2K COMFORT (with Ex identification)

The 2K COMFORT system is also available as a 2-circuit system (1 control cabinet, 2 fluid circuits).

2.2 

TYPE OF USE

The device is suitable for mixing 2K, 3K and 4K liquid products such as paints and lacquers.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:

Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.

Follow the instructions in the operating manual.

2.3 

FIELD OF APPLICATION

2.3.1  WITHOUT EX IDENTIFICATION

The control cabinet and the fluid section may 

not

 be used in potentially explosive areas.

Remote control

: The remote control (accessory) may always be used in potentially 

explosive areas (zone 1 and zone 2).

See chapter 

6.5

.

2.3.2  WITH EX IDENTIFICATION

Control cabinet

   

The control cabinet may 

not

 be used in potentially explosive areas.

Fluid section

   

The 2K COMFORT fluid section (with Ex identification) is suitable for use in potentially 

explosive areas (zone 1 and zone 2)

See chapter 

6.5

.

Содержание 2K COMFORT

































































































































Отзывы: