Waeco PerfectView M9LQ, Инструкция по установке и эксплуатации

Страница: 34 / 276

Installing the LCD monitor PerfectView M9LQ
EN 34
7.3 Connecting the monitor electrically
The circuit diagram for the LCD monitor can be found in fig. d , page 8:
No. Description
1 Monitor
2 Monitor cable plug
3 Socket for connection cable
4 Connection cable
5 CAMERA BACK socket: Connection to BACK video source, e.g. reversing
camera
6 CAMERA RIGHT socket: Connection to RIGHT video source, e.g. side
camera
7 CAMERA LEFT socket: Connection to LEFT video source
with video signal detection, e.g. side camera
8 CAMERA FRONT socket: Connection to FRONT video source
with video signal detection, e.g. front camera
9 Cable (red): Connection to 10 – 32 V, e.g. to the positive pole of the ignition
(connected positive, terminal 15) or the positive pole of the battery (terminal
30)
10 Cable (brown): CAMERA B TRIGGER control cable for CAMERA BACK
video input,
such as for connecting the reversing light
11 Earth cable (black): Connection to earth
12 Cable (blue): CAMERA R TRIGGER control cable for CAMERA RIGHT video
input, e.g. side camera
13 Cable (white): CAMERA L TRIGGER control cable for CAMERA LEFT video
input, e.g. side camera
14 Cable (green): CAMERA F TRIGGER control cable for CAMERA FRONT
video input, e.g. front camera
15 Cable (yellow): SPLIT control cable for activating the split-screen (screen
is divided into two parts with any two cameras, e.g. side cameras on one
transport belt)
16 Socket (yellow): LIVE VIDEO OUTPUT, video output
17 Socket (white): AUDIO OUT, audio output
18 Socket (green): REC V OUT, video recorder output
19 Socket (black): AUX AUDIO INPUT, audio input 3.5 mm clip socket