Waeco PerfectView M9LQ, Инструкция по установке и эксплуатации

Страница: 31 / 276

PerfectView M9LQ Installing the LCD monitor
EN 31
6.3 Main menu
In the main menu, the following sub-menus are displayed:
7 Installing the LCD monitor
7.1 Tools required (fig. 1 , page 3)
For installation and assembly you will need the following tools:
 Measuring ruler ( 4 )
 Centre punch ( 5 )
 Hammer ( 6 )
 Drill head set ( 7 )
 Drill ( 8 )
 Screwdriver ( 9 )
To establish and test the electrical connection , the following tools are required:
 Diode test lamp ( 1 ) or voltmeter ( 2 )
 Heat shrinking sleeve
 Hot air blower ( 10 )
 Crimping tool ( 11 )
 Soldering iron (optional) ( 12 )
 Solder (optional) ( 13 )
 Insulating tape ( 14 )
 Cable bushing sleeves (optional)
To fasten the cables , you may require additional cable binders.
Sub-menu Description
Camera setup The menu for making camera settings.
Camera name The list of cameras and their display names in normal
mode.
OSD setup The menu for making screen display settings.
System setup The menu for making monitor settings.
Trigger setup The menu for making trigger function settings.
Trigger priority The priority list for the trigger function.
Reset all Restores the device to the default settings.