![background image](http://html1.mh-extra.com/html/wacker-neuson/kramer-5055e/kramer-5055e_operators-manual_4515366088.webp)
4-16
BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm
4 Putting into operation
Adjusting the mirrors
Limited field of vision
The line-of-sight is the area the operator can see from the operator seat.
Rearview mirrors or camera systems can be installed on the machine to
support the operator.
WARNING
Accident hazard due to restricted field of vision!
Failure to observe this can cause serious injury or death.
►
Before putting the machine into operation, check the visible area from
the operator seat and adjust the mirrors so that the visible areas
behind and beside the machine are seen as close as possible to the
machine.
►
Additional equipment or attachments must not be installed if they
impair visibility.
►
Remove obstacles within the job site.
►
Move material only in transport position.
►
If the field of vision cannot be safely adjusted with the mirrors, the
operator must take appropriate measures (e.g. person guiding the
operator).
The operator of the machine always has the sole responsibility for this.
►
Before performing machine travel on public roads, remove any
attachments not approved for transport on public roads
– see chapter 3 “Use of attachments” on page 3-16
.
WARNING
Accident hazard due to persons in the danger zone!
Failure to observe this can cause serious injury or death.
►
Always ensure that nobody is in the danger zone.
►
Seal off the danger zone.
►
Stop all work movements with the machine immediately if persons
enter the danger zone.
Information
The field of view was checked and assessed in accordance
with ISO 5006. The instructions in the standard are met in all areas with
attachments that are licensed for use on public roads.
Содержание KRAMER 5055e
