Wacker Neuson KRAMER 5055e страница 328 Скачать руководство пользователя

Страница: 328 / 420

7-76

BA 357-00 * 3.0 * 35700_07_Wartung.fm

7 Maintenance

7.15 Tires

Important information on the tires

WARNING

Accident hazard from improper attaching tires or repair
work on the rims!

Improper mounting or repair work can cause serious injury or death.

►

Only allow assembly work to be performed by
an authorized service center.

►

Welding and cutting the rims is prohibited. Replace damaged rims by
new ones.

WARNING

Accident hazard due to use of tires other than certified!

Can cause serious injury or death.

►

Install only approved tires/wheels

– see chapter 9 “” on page 9-6

►

Have wheels changed by an authorized service center if possible.

WARNING

Risk of tires bursting during inflation!

A bursting tire can cause serious injury or death.

►

Wear gloves and safety glasses.

►

Check the tires and rims for damage before inflating the tires.

►

Use only filling devices with calibrated pressure
gages to inflate the tires.

►

Pay attention to ensure that when checking the tire pressure and/or
when inflating the tires, no persons remain within the danger zone.

►

Observe the mandatory tire inflation pressure
(see label on front window).

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды