Wacker Neuson KRAMER 5055e страница 218 Скачать руководство пользователя

Страница: 218 / 420

5-92

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5 Operation

Picking up a load

WARNING

Tipping hazard of machine due to failure to pay attention to the load
diagram!

Can cause serious injury or death.

►

Observe the payloads specified in the load diagram.

Information

To guarantee that the load can be picked up with precision,
switch off the load stabilizer (opt)!

1. Move the machine up to the load so that the pallet

forks or the fork arms are at a right angle to the load.

➥

The fork arms must be the furthest possible apart,
and at an equal distance from the left and right side of the load.

2. Drive the vehicle forward. Drive the machine forward and move the

fork arms as far as possible underneath the pallet until the material
touches the fork frame.

3. Raise the load carefully and tilt it in slightly.
4. Reverse carefully until the loader unit can be

lowered to transport position.

5. In transport position, lower the loader unit as far as possible.
6. Reverse slowly from the material.

Fig. 187

Ansicht_021.iso

Ansicht_022.iso

Ansicht_023.iso

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды