Wacker Neuson KRAMER 5055e Скачать руководство пользователя

Страница: 217 / 420

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5-91

Operation 5

Adjusting the fork arms of the pallet forks

WARNING

Accident hazard if the fork arms are not correctly locked
on the fork frame!

The fork arms can come off and cause serious injury or death.

►

Check before working whether locking levers

on both fork arms are

folded down and safely engaged in the fork frame!

►

Adjust the fork arms centrally with regard to the fork frame.

►

Check whether safety screws

on either side on the upper slide rail of

the fork frame are not damaged and whether they are firmly screwed.

CAUTION

Crushing hazard when shifting the fork arms!

Fingers and hands can be crushed and injured between the fork frame
and fork arms.

►

Do not touch the sliding surface of the fork frame
when shifting the fork arms.

►

Wear protective gloves.

1. Set the locking lever to the vertical position (position

2. Slide the fork arms to the required distance until the locking pin

engages in a slot on the fork frame.

3. Fold down the locking lever (pos.

➥

The upper edge of the locking lever must be flush with the edge

➥

Also refer to the Operator’s Manual of the pallet forks.

126801e0.ai

Fig. 186

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды