Wacker Neuson KRAMER 5055e Скачать руководство пользователя страница 204

Страница: 204 / 420

5-78

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5 Operation

Loading vehicles

1. If possible, the truck and the working direction of the machine should

form an angle of 45°.

2. Only raise the full bucket to the tilt-out height when the vehicle travels

in a straight line toward the truck.

Information

If possible load material with the wind behind you to keep the dust away
from your eyes, air filters and fans.

Freeing the machine

Proceed as follows if the machine should get stuck when picking up
material:

1. Tilt out the bucket until the blade is vertical above the ground.
2. Lower the loader unit all the way.
3. Gradually tilt in the bucket.

➥

The vehicle is pushed backward.

4. Reverse slowly.
5. Repeat this procedure until the wheels reach firm ground.
6. Reverse the vehicle away.

Fig. 164

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Бренды по названию

Популярные бренды