Wacker Neuson KRAMER 5055e Скачать руководство пользователя

Страница: 175 / 420

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5-49

Operation 5

Notes on conversion

WARNING

Risk of injury to persons in the danger zone!

Persons in the danger zone are possibly not seen when reversing the
machine. Can cause serious injury or death.

►

Adjust the existing visual aids (for example the rearview mirrors)
correctly.

►

Be particularly carefully when reversing the machine.

►

Interrupt work immediately if persons enter the danger zone.

WARNING

Risk of injury due to unintentional release of the hydraulic lock!

Incorrectly locked attachments can be unintentionally released and cause
accidents. Can cause serious injury or death.

►

Always check the attachments for correct locking.

CAUTION

Risk of injury due to pressure!

A fine jet of hydraulic oil under high pressure can penetrate through the
skin.

►

Seek medical attention immediately if hydraulic oil penetrates
the skin or eyes.

►

Only open sections of the hydraulic system after the pressure in them
has been released.

►

Wear protective clothes.

CAUTION

Risk of injury due to uncoupled attachments tipping over!

Attachments that tip over can cause injury to persons.

►

Ensure that no one is in the danger zone.

►

Only park the machine on firm and level ground.

►

Only close attachments with movable parts
(for example, multipurpose bucket).

►

Ensure the safe and stable position of the attachment, if necessary use
supports provided for this purpose.

Содержание KRAMER 5055e





































































































































































































































































































































































































































Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды

Wacker Neuson KRAMER 5055e, Руководство оператора

Результаты поиска

Содержание KRAMER 5055e

Отзывы:

Похожие инструкции для KRAMER 5055e

Бренды по названию

Популярные бренды