Wacker Neuson KRAMER 5055e страница 174 Скачать руководство пользователя | Manualshive

Страница: 174 / 420

background image

5-48

BA 357-00 * 3.0 * 35700_05_Bedienung.fm

5 Operation

5.10 Attachments

Only the following attachments are described in this Operator’s Manual.
• Standard bucket
• Multipurpose bucket
• Pallet forks
Refer to the respective operation manuals for the function and fitting of
further attachments.

Information on attachments

WARNING

Accident hazard due to incorrect attachments!

Using wrong or unauthorized attachments can cause accidents or death.

►

Only use approved attachments.

WARNING

Accident hazard due to tipping over of vehicle!

The weight ratios of the machine change with a loaded attachment.
There is a tipping hazard, in particular in curves. Can cause serious injury
or death.

►

Travel with loader unit lowered.

►

Do not exceed the permissible payloads.

►

Adapt the travel speed to the prevailing conditions
and the material loaded.

WARNING

Accident hazard due to damaged attachments!

Damaged attachments can have negative effects on the use of the
machine. Damaged attachments can cause serious injury or death.

►

Do not put damaged attachments into operation.

►

Before starting work, always check the attachments for damage,
correct locking and firm installation.

►

Uncouple attachments before working on them.

«
...
172
173
174
175
176
...
»

Содержание KRAMER 5055e





































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для KRAMER 5055e

Бренд: Hyundai Страницы: 655

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды