manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Руководство оператора

Поделиться
Скачать
Wacker Neuson KRAMER 5055e Скачать руководство пользователя страница 338

7-86

BA 357-00 *  3.0 * 35700_07_Wartung.fm

7 Maintenance

Measures for maintaining anticorrosive protection

WARNING

Special hazards during anti-corrosion protection!

Handling chemical substances can cause serious injury or death.

►

When handling chemical substances of any kind, such as solvents, 
wax, etc., observe the specific product-related safety regulations 
(safety data sheet).

►

Ensure sufficient room ventilation.

►

Do not use unprotected lights or open flames.

►

Do not smoke.

►

Only work on the electrical system if the battery connector has been 
disconnected!

Information

Maintenance intervals 

– see "Maintenance plan" on page 7-6

.

Cleaning

NOTICE

Contrary to the instructions in section„

Cleaning and maintenance

“ on 

page 

7-19

, do not clean machines with anticorrosion protection with a 

bristle brush nor with a steam jet or a high-pressure cleaner!

►

If cleaning the machine with these means cannot be avoided, check 
the wax coating very carefully and have it renewed or reapplied as 
required.

• If the machine is used in corrosive environment over a longer period of 

time, remove the floor mat in the cabin. This will avoid a collection of 
corrosive moisture.

• Thoroughly clean machines that are put out of operation over a longer 

period of time.

• Clean the machine at least once a week. In particular, remove 

corrosive deposits (such as salt crusts) as fast as possible.

• Clean the machine with cold running water preferably.

Содержание KRAMER 5055e





































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды